Closed Auctions

SOLD EBAY Item number: 180317515044

Champion 1912 Engraving Machine, Controller

Included is Controller, Engraving Table, Cables, and D1.4 Software and Manuals.  The D1.4 Software is very easy to use and includes 70 engraving fonts and 400 logos.  As you can see from the pictures the machine is very clean and in excellent working condition. The table surface is virtually unmarked. This engraver has been completely gone through by a service technician and needs nothing. The 1912 features solid cast aluminum construction, 11/64" top loading spindle, and a Quiet 1/8 HP AC induction spindle motor.  This is not a cheap plastic machine. Computer requirements for the  D1.4 Software is a PC with Dos 6.22 or better, available serial port. Electrical requirements are 110 volts, 15 amps.  D1.4 software is DOS, but will run in Windows 95, 98. Engraving area is 19 inches by 12 inches. This engraver will work with Cadlink's EngraveLab, a windows based sign making program, without any modifications. Contact me for additional information. www.engravingsvc.com
Info about Engravelab here.   Screenshot    General Info

30 day warranty and telephone technical support.
Feel free to call 815 354-6353 with any questions.

If you are outside the United States, please contact me prior to bidding to discuss voltage requirements and freight options.

As stated in the original sales literature. "Whether you're engraving signs, industrial panels, or plaques, the Champion 1912 has the table size, power, and accuracy to meet your needs." 1992 Pricing $13600.00 less computer.

Feedback
Positive feedback ratingsatisfied with the service and productBuyer:
jvamco ( 2 )
Feb-10-09 15:48 19 x12 Computerized Engraver, Engraving Machine (#180317515044)

 

 

Champion 1912 Engraving Machine, Controller
Sold Ebay Auction
180157602327

 

Champion 1912 Engraving Machine, Controller

Included is Controller, Engraving Table, Cables, and D1.4 Software and Manuals.  The D1.4 Software is very easy to use and includes 70 engraving fonts and 400 logos.  As you can see from the pictures the machine is very clean and in excellent working condition. Updates Include: Teflon coated Leadscrews, Bearings and a new router belt. The table is virtually unmarked. This engraver has been completely gone through by a service technician and needs nothing. The 1912 features solid cast aluminum construction, 11/64" top loading spindle, and a Quiet 1/8 HP AC induction spindle motor.  This is not a cheap plastic machine. Computer requirements for the  D1.4 Software is a PC with Dos 6.22 or better, available serial port. Electrical requirements are 110 volts, 15 amps.  D1.4 software is DOS, but will run in Windows 95, 98, ME, 2000, and XP. Engraving area is 19 inches by 12 inches. This engraver will work with Cadlink's EngraveLab, a windows based sign making program, without any modifications. Contact me for additional information.
30 day warranty and telephone technical support.
Feel free to call 815 354-6353 with any questions.

If you are outside the United States, please contact me prior to bidding to discuss voltage requirements and freight options.

As stated in the original sales literature. "Whether you're engraving signs, industrial panels, or plaques, the Champion 1912 has the table size, power, and accuracy to meet your needs." 1992 Pricing $13600.00 less computer.

Additional pictures and information can be found at http://www.engravingsvc.com/Used%20Equipment.htm

Estimated Shipping rates to East Coast (New York City) $275.00 or West Coast (Los Angeles) $ 275.00 by Roadway Motor Freight plus a $100.00 crate charge or pick up in Chicago suburbs.

Foreign buyers responsible for any additional duties or taxes.

 

(Picture 1) (Picture 2) (Picture 3) (Picture 4) (Picture 5)
(Picture 6) (Picture 7) (Picture 8) (Picture 9) (Picture 10) (Picture 11) (Picture 12)  
Covers removed in some pictures for clarity.

Ebay Feedback

Positive feedback rating Very helpful in explaining everything I asked about. Buyer: Oct-09-07 21:31
  Meistergram/H-Square 1912 Engraver (#180157602327)   View Item

 


Champion 1912 Engraving Machine, Controller, and Software
EBAY Auction#
180133921934
SOLD

    Included is Controller, Engraving Table, Cables, Software and Manuals. D1.4 Software is very easy to use and includes 70 engraving fonts and 400 logos.  As you can see from the pictures the machine is very clean and in excellent working condition. Updates Include: Refurbished power supply, new controller cooling fan and router belt. Some cosmetic marks in the table. The 1912 features solid cast aluminum construction, 11/64" top loading spindle, and a Quiet 1/8 HP AC induction spindle motor. The computer requirement for included D1.4 Software is a PC with Dos 6.22 or better, available serial port. Electrical requirements are 110 volts, 15 amps. Standard D1.4  (included) software is DOS, but will run in Windows 95, 98, ME, 2000, and XP. This machine will work with Cadlink's EngraveLab without any modifications. Engraving area is 19 inches by 12 inches. The D1.4 software does have a long plate feature. 
30 day warranty and telephone technical support.
Feel free to call 815 354-6353 with any questions.

As stated in the original sales literature. "Whether you're engraving signs, industrial panels, or plaques, the Champion 1912 has the table size, power, and accuracy to meet your needs." 1992 Pricing $13600.00 less computer.

(Picture 1) (Picture 2) (Picture 3) (Picture 4) (Picture 5)
(Picture 6) (Picture 7) (Picture 8) (Picture 9) (Picture 10) (Picture 11) (Picture 12) (Picture 13
Covers removed in some pictures for clarity.

EBAY Feedback

Positive feedback rating This was my first time on Ebay and this whole transaction was good. Buyer: Aug-07-07 20:03
  -- (#180133921934) --  

 


Champion 1912 Engraving Machine, Controller, and Software
EBAY Auction#
180122703657
SOLD
 

    Included is Controller, Engraving Table, Cables, Software and Manuals. D1.4 Software is very easy to use and includes 70 engraving fonts and 400 logos.  As you can see from the pictures the machine is very clean and in excellent working condition. Many updates: New Teflon coated leadscrews and end bearings on all 3 axis for maintenance free performance, refurbished power supply, controller cooling fan and router belt.  Some cosmetic marks in the table. The 1912 features solid cast aluminum construction, 11/64" top loading spindle, and a Quiet 1/8 HP AC induction spindle motor. The computer requirement for included D1.4 Software is a PC with Dos 6.22 or better, available serial port. Electrical requirements are 110 volts, 15 amps. Standard D1.4  (included) software is DOS, but will run in Windows. This machine will work with Cadlink's EngraveLab without any modifications. Engraving area is 19 inches by 12 inches. The D1.4 software does have a long plate feature. 
30 day warranty and telephone technical support.
Feel free to call 815 354-6353 with any questions.

As stated in the original sales literature. "Whether you're engraving signs, industrial panels, or plaques, the Champion 1912 has the table size, power, and accuracy to meet your needs." 1992 Pricing $13600.00 less computer.

(Picture 1) (Picture 2) (Picture 3) (Picture 4) (Picture 5)
(Picture 6) (Picture 7) (Picture 8) (Picture 9)

EBAY Feedback

Positive feedback rating Excellent response time, extremely friendly. Overall fantastic buying experience Buyer: Jun-11-07 09:14
  Meistergram/H-Square 1912 Engraver (#180122703657)   View Item

Champion 1912 Engraving Machine, Controller, and Software
EBAY Auction#
180097150824
SOLD

This auction is for a Champion 1912 Engraving machine. Included is Controller, Engraving Table, Cables, Software and Manuals. In Addition I will include an extra router belt Diamond drag tool and a cutter wrench so that you can engrave the day you recieve the machine. As you can see from the pictures the machine is in excellent condition. It is however missing the X and Y axis covers. The 1912 features solid cast aluminum construction, 1/4" 3 speed top loading spindle, and a Quiet 1/8 HP AC induction spindle motor. The computer requirement for included D1.4 Software is a PC with Dos 6.22 or better, available serial port. Electrical requirements are 110 volts, 15 amps. Standard D1.4  (included) software is DOS, is very simple to use and comes with 70 Engraving Fonts and 400 Logos. It will run in Windows 98, 2000, and XP. This machine will work with Cadlink's EngraveLab without any modifications. Email me if you would like pricing to upgrade the software. Engraving area is 19 inches by 12 inches. The included software does have a long plate feature. Payment is to be Paypal, Credit Card or cleared check. The machine can be picked up or shipped. Shipping will be by Roadway motor freight from Zip code 60050, near Chicago. Shipping weight 275 pounds. Approximate crate size 36 x 36 x36. Shipping cost = Actual motor freight cost + $100.00 crate fee. Call (866) 842-8202  or  (708) 757-1079  for a rate quote. I will deliver to Roadway terminal 354.  The machine has been tested and is in good working order. See picture 6 for a sample engraved with the machine. Please ask any questions prior to bidding. All offers considered.

As stated in the original sales literature. "Whether you're engraving signs, industrial panels, or plaques, the Champion 1912 has the table size, power, and accuracy to meet your needs." 1992 Pricing $13600.00 less computer.

EBAY Feedback

Positive feedback rating The service and product were great. Thanks Buyer: Mar-25-07 09:06
  -- (#180097150824) --  

Meistergram/H-Square 912 Engraver
EBAY Auction#
180064672093
SOLD $1750.00

This auction is for a PC912 Engraving machine. Included is Controller, Engraving Table, Cables, Software and Manuals. As you can see from the pictures the machine is in excellent working condition. Standard D1.4  (included) software is DOS , but will run in Windows. This machine will work with Cadlink's EngraveLab without any modifications. Email me if you would like pricing to upgrade the software. Engraving area is 9 inches by 12 inches. The included software does have a long plate feature. Payment is to be Paypal, Credit Card or cleared check. The machine can be picked up or shipped. Shipping will be by motor freight from Zip code is 60050. Shipping weight 175 pounds. Approximate Crate Dimensions: Height = 35", Width = 29" , Length = 29" Shipping cost = Actual insured motor freight cost + $50.00 crate fee. The machine has been tested and is in perfect working order.

EBAY Feedback

Positive feedback rating Smooth Transaction+++++ Buyer: Jan-14-07 10:13
  -- (#180064672093) --  

EngraveLab Information
http://www.engravingsvc.com/Screenshot.htm

http://www.engravingsvc.com/EngraveLab.htm

 

Hit Counter  

Wanted Meistergram/H-Square Engravers. Any condition considered.

Back to Menu